Home   |   Products   |   Order   |   Support   |   ? !1 UK Web Hosting
 

Configuring Your Virtual Server For Mail-On-Demand
If you wish to implement Microsoft Exchange Mail-On-Demand you must first Configure Your Exchange Server for Mail-On-Demand and then follow the steps below.

NOTE: You should carefully consider the following.

  • All e-mail (incoming and outgoing) will be held in the queue until it is flushed out, either by an ETRN command or the flush command in your crontab. This means that if your crontab is set to flush every 4 hours, an outgoing e-mail could wait 4 hours before it is sent from your Virtual Server.

  • Mail dequeuing will affect all domains hosted on your Virtual Server. So, only one domain should be hosted on your Virtual Server unless all domains on the server are using the mail dequeuing feature.

  1. Setup the MX records for the domain name with the 10 level pointing to your Exchange Server and the 20 level pointing back to your Virtual Server.

  2. Setup your Virtual Server to queue up e-mail until the ETRN command is received by your Exchange Server.

    1. Add the following line to the Options section of the ~/etc/sendmail.cf file on your Virtual Server:

      Odqueueonly     # defer mail on the server
      

    2. Comment out the following two lines in Ruleset 0:

      R$+<@$=w>       $@$>90$1     Remove local addresses
      R<@$=w>$-$+     $@$>90$3     Remove local routes/UUCP
      

      These two lines let the server know what domains are local to your Virtual Server. For mail dequeuing, no domain should resolve locally.

    3. Add the following line to your Virtual Server Crontab file:

      00 0-23/4 * * * /usr/local/bin/virtual sendmail -q
      

      This will flush out your Virtual Server mail queue every four hours. You may need to modify this according to how long your Exchange Server may be off line. Every time an attempt is made to flush the queue, a hop is added to the headers for each message queued up. This means that if you set your crontab to flush the queue every 15 minutes then an additional hop would be added every 15 minutes. This would mean that after 6 hours in the mail queue, a message would have 24 hops (where the maximum is 26). Therefore, any e-mail older than 6 1/2 hours would be bounced with "too many hops".


Site Map  |  Contact Us!
Copyright © 1998-2001 Bright Builders, Inc. All rights reserved.
Last Modified: Wed Mar 21 16:27:41 2001 GMT
Page Built: Mon Jul 2 19:59:18 2001 GMT

   
A L S O  S E E
· Configuring Your Exchange Server For Mail-On-
Demand
· Virtual Server E-Mail
· Virtual Server Help